The lead methods of the sensor are Hersman lead, aerial insertion lead and direct lead. Sensors commonly used are Hersman leads: this lead method is a common domestic and international lead method. The lead method of the sensor has a good dustproof and splash resistance. It has high reliability. In the wiring method, the Hessmann type sensor is simple and convenient, and the Hessmann connector has four terminal blocks, which can meet the situation that most sensors use two-wire or three-wire output, and the line is not easy to fall off and there is no interference between the lines. Compared with the other two lead methods, Hersman and the aviation plug lead cable is detachable, the direct lead cable and the sensor are integrated, non-removable, Hirschmann is the side wall outlet Aviation plug is straight outlet, aviation plug lead or direct lead has high tightness, when the application site of the sensor needs a higher protection level, the sensor more use the aviation plug lead or direct lead. As a detection device, the sensor senses the information being measured. The existence and development of sensors allows objects to have senses such as touch, taste and smell, and has a wide range of applications in the field of industrial automation. The user needs to choose which way to use the lead of the sensor, depending on the field installation requirements. Product consultation, product customization, agent, technical inquiry, quotation, etc. If you have any questions, please contact Xingyi: 400-600-4496!