The micro-differential pressure transmitter adopts a piezoresistive chip, which uses the thin-film resistance on the substrate for zero-point correction, zero-point temperature compensation and sensitivity compensation, and the high-performance and stable silicon chip packaging makes the micro-differential pressure transmitter have a high static pressure value, strong anti-interference, stable and reliable. The differential pressure transmitter can be used in the microdifferential pressure application for various gas measurements. Micro differential pressure transmitters are widely used in petrochemical, environmental protection, air compression, power station operation inspection, locomotive braking system, thermal power unit, light industry, mechanical metallurgy, building automation, constant pressure water supply system, other automation and testing systems, industrial process detection and control, laboratory pressure calibration, boiler air supply, underground ventilation, indoor exhaust, subway ventilation, dust-free workshop and other occasions for weak wind pressure measurement and control. The connection methods used in the field application of the micro differential pressure transmitter include pagoda mouth, quick connector, threaded connection and other ways, and the pressure interface at both ends of the micro differential pressure transmitter should be horizontal, so as to minimize the influence of the installation position on the micro differential pressure transmitter. When installing and using the micro differential pressure transmitter, it should be noted that the storage and use environment should be rainproof and moisture-proof, and the micro differential pressure transmitter should not be subject to mechanical vibration or impact, so as not to affect the measurement accuracy. The temperature range of the environment where the micro differential pressure transmitter is located should be -20~55°C, and the relative humidity should not be greater than 80%. Finally, it is important to note that the environment in which the differential pressure transmitter is used and measured must not contain corrosive gases. If you have any questions about product consultation, product customization, agency, technical inquiry, quotation, etc., please contact Xingyi, 400-600-4496!