Purchase a good pressure sensor is very important, pressure sensors to the hands of how to correctly install, but also many technicians face and to solve the problem. Pressure sensors in the installation location and the measured medium, in order to obtain the most appropriate and accurate measurement results, should pay special attention to the following conditions: 1. Pressure sensors must be in the absence of pressurization and no power supply for the installation of equipment. 2. Pressure sensor is prohibited to measure and transmitter contact material is not compatible with the media, such as stainless steel corrosive or superheated media. 3. Pressure sensors less than 0.03MPa vertical installation (except for gas special), so as not to affect the measurement accuracy, the other can be installed at any angle in the measurement point, if the interface size and the field interface size does not match, you can make your own conversion connector connection. 4. Pressure sensor in the hydraulic system, it should be noted that the pressure of the equipment interface upward installation (to facilitate the discharge of gas). 5. Pressure sensors try to install in the temperature gradient changes in small occasions. 6. Pressure sensor installation should be installed between the transmitter and the medium with a pressure shut-off valve, in order to overhaul and prevent the pressure port blockage and affect the measurement accuracy. Star Instruments Sensor Technology Co., Ltd. is a collection of R & D, production, sales as one of the high-tech enterprises. Specializing in the production of pressure transmitters, level transmitters, temperature transmitters, temperature and humidity transmitters, differential pressure transmitters, soil moisture transmitters, 3051 transmitters and related instrumentation accessories. Many products under the brand of Star Instruments have obtained a number of patents issued by the state, such as CE certification, IS9001 certification, SGS certification, TüV SüD certification, explosion-proof certification and so on. For product consultation, product customization, agency, technical inquiries, quotations, etc., please contact Star Instruments: 400-600-4496 !